You are here: Technical Articles > Safety Equipment Technical Articles > Webbing Jackstays - Custom Build Instructions
| Webbing Jackstays - Custom |
Ignore the different colours of the webbing in the illustrations of the ends - They are all shown in blue
Your Jackstays will be the colour you have chosen for the centre section - Pictures are illustrative only
Measurement will be from bearing edge to bearing edge - See photo below
Black line indicates "Bearing Edge" - The point from which your measurements will be taken
We suggest you allow about 20cm (8'') gap if you are using lanyards
Remember, we will take your measurement to be from bearing edge to bearing edge, as shown above
Spliced-on Lanyards are 2 mtrs long |
| Instructions for Custom-building your own Webbing Jackstays |
- From the drop down box choose your left-hand ending, if required
- From the drop down box choose your right-hand ending, if required
- Enter a length. Make sure you have the decimal point in the correct place. You can enter up to 3 decimal places.
- From the drop down box choose your centre section. This is the material from which your product will be made.
- Once you have completed the 4 steps, the website will generate:
- a picture version of what you have chosen
- a price including VAT and any discount, if applicable
- Check the item is designed as you wish. You can alter any of the 4 boxes and the website will update the picture and the price.
- Enter the quantity you want to purchase then click the "Add to Cart" button to put it in your shopping basket
- N.B. the web page will then reset itself.
- To view a detailed description of your selection, click on "View your Basket" located in the green banner at the top of the page or go to "Checkout".
- N.B. The mini " view basket" will only show a short summary of your selection
|
Buy from us with confidence, with...
We accept the following credit cards: