Home | Contact Us | About Us | Shipping

Checkout Items: 0 Value: £0.00 inc.VAT

My Account


You are here: Chandlery > Splicing & Accessories > Splicing Fids and Tools > Barton Easy Splice

Barton Easy Splice

ItemPart No Normal Price Online Price  
Easy splice62050£35.00£35.00


The Barton Easy Splice is new on the market. The ergonomical design is perfectly balance for ease of use.

The pack comes with complete with 4 interchangeable wire sizes for different diameter line. Instructions below and tutorial video on the barton website.

  1. To create a spliced loop, mark the rope on either side of the loop size desired, leaving at least 15 cm of rope for the tail (the short end.)
  2. On the long end of rope, push the EasySplice needle through the middle core of the rope, and attach the short end into the end of the EasySplice needle and pull through until you have your required loop size.
  3. Push the EasySplice through the short end of the rope just under the first marked position, and in the same way, attach the long end of the rope into the needle and pull it through the core.
  4. This has now created a lock.
  5. Putting the short end of the rope beside the long end of the rope, will give you the point furthest away from your splice to insert the EasySplice.
  6. Push the EasySplice up inside the core until you reach the splice and then exit the core at that point.
  7. Attach the short end into the EasySplice needle and pull the tail inside the core until it comes out the other end. Now you can taper the end to give you a better finish.
  8. Pull the outer rope over the inner rope and the job is finished.

Do you need assistance? Then contact us...

If you have any questions or need help with your purchase, please call us on:

01297 20744 or email sales@jimmygreen.co.uk

sagepayBuy from us with confidence, with...

All payments are taken securely with SagePay.

cardsWe accept the following credit cards: