Home | Contact Us | About Us | Shipping

Checkout Items: 0 Value: £0.00 inc.VAT

My Account


You are here: Yacht Ropes & Rigging > Anchor Warps Spliced to Chain > 3-Strand Nylon Spliced to Chain > Liros 14mm 3-Strand Nylon Spliced to 8mm Chain

Liros 14mm 3-Strand Nylon Spliced to 8mm Chain

Chain SectionRope SectionRope Finish
Length (m)
None Selected
Length (m)

Please select Left End

Please select Center End

Please select Right End

Please select your 'Length' & 'Rope Section'

February offer

24.00% off displayed prices

STEP 1 Make your selection from all the drop down menus.
STEP 2 Enter your chosen length. N.B. This is accurate to 1000th of a metre for rigging purposes.
STEP 3 Your price will be displayed. Adding the item to your basket will clear the menus to start again.
N.B. Products will match the build description. Images are for illustrative purposes only.

Liros 14mm 3-Strand Nylon spliced to 8mm DIN766 Calibrated Anchor Chain is ideal for Bower or Kedge anchor warps.
Select 12mm for yachts up to approximately 8 metres and 14mm for yachts up to approximately 10 metres.
Click here for Custom Build Instructions

LIROS 100% Nylon is manufactured to DIN 83330/EN696, heat set, white with green or marine marker yarn or in full colour navy.
LIROS 3-Strand Nylon features stretch characteristics of 20% at the breaking point.
LIROS 14mm 3-Strand Nylon breaking load = 4400kg.

Jimmy Green Marine Chain is usually sourced exclusively from Maggi Catena in Italy.
8mm DIN766 Aqua 4 is temporarily out of stock. All other sizes are still in stock. We anticipate that new stock of 8mm DIN766 will be available from May the 15th.

Meanwhile, Jimmy Green Marine have sourced Titan Grade 40 certified 8mm DIN766 galvanised high test chain as an alternative. Jimmy Green Marine will contact every customer that purchases 8mm DIN766 to determine which chain is preferred.

Titan products can be viewed here. Please note that 8mm DIN766 chain is not the same size as 5/16 High test chain. The 8mm DIN766 is not currently listed on their website but certificates of conformity are available.

Maggi Catena manufacture, hot dip galvanise and proof test their Aqua 4 chain, all in house, at the Maggi Catena factory in Italy.

Click HERE to view a sample test certificate

There is one main calibration for 7mm chain - DIN766.
It is very important to check the size and calibration of your gypsy/chain before you order.
If you are unsure we can help you to decide - we will take all reasonable steps to ensure you get the correct chain.
Click HERE for Calibrated Anchor Chain - General Information


Do you need assistance? Then contact us...

If you have any questions or need help with your purchase, please call us on:

01297 20744 or email sales@jimmygreen.co.uk

sagepayBuy from us with confidence, with...

All payments are taken securely with SagePay.

cardsWe accept the following credit cards: