Home | Contact Us | About Us | Shipping

Checkout Items: 0 Value: £0.00 inc.VAT

My Account

VIEW BASKET

You are here: Yacht Ropes & Rigging > Anchor Warps Spliced to Chain > Anchorplait Spliced to Chain > Liros 14mm Anchorplait Spliced to 8mm Chain

Liros 14mm Anchorplait Spliced to 8mm Chain

Chain SectionRope SectionRope Finish
Length (m)
None Selected
Length (m)

Please select Left End

Please select Center End

Please select Right End

Please select your 'Length' & 'Rope Section'

February offer

24.00% off displayed prices

STEP 1 Make your selection from all the drop down menus.
STEP 2 Enter your chosen length. N.B. This is accurate to 1000th of a metre for rigging purposes.
STEP 3 Your price will be displayed. Adding the item to your basket will clear the menus to start again.
N.B. Products will match the build description. Images are for illustrative purposes only.

Liros 14mm Anchorplait Spliced to 8mm DIN766 Calibrated Anchor Chain is ideal for Bower and Kedge anchor warps.
Select 14mm for yachts up to approximately 10 metres.
LIROS 14mm Anchorplait Nylon Breaking Load = 4400kg
LIROS 14mm Octoplait Polyester Breaking Load = 3800kg
Click here for Custom Build Instructions

Anchorplait White Nylon is manufactured EXCLUSIVELY by LIROS Ropes with Easy Splice Markers for Jimmy Green Marine.
The 8 strand construction [2 pairs left hand, 2 pairs right hand] gives a balanced performance and no twist under tension.
Anchorplait is the rope that won't cockle. It flakes like chain so it is ideal for use as Anchor warp.

The Anchorplait is usually spliced directly into 11 links of the chain meaning that the chafe points are spread out and greatly reduced. The low profile and tapered end allows it to pass through rings and over bow rollers easily. Alternatively, we can splice directly onto one link of chain for ease of use through a windlass. Please purchase the warp with an 11 link splice and email us to advise of your preference.

Jimmy Green Marine Chain is usually sourced exclusively from Maggi Catena in Italy.

8mm DIN766 Aqua 4 is temporarily out of stock. All other sizes are still in stock. We anticipate that new stock of 8mm DIN766 will be available from May the 15th.

Meanwhile, Jimmy Green Marine have sourced Titan Grade 40 certified 8mm DIN766 galvanised high test chain as an alternative. Jimmy Green Marine will contact every customer that purchases 8mm DIN766 to determine which chain is preferred.

Titan products can be viewed here. Please note that 8mm DIN766 chain is not the same size as 5/16 High test chain. The 8mm DIN766 is not currently listed on their website but certificates of conformity are available.

Maggi Catena manufacture, hot dip galvanise and proof test their Aqua 4 chain, all in house, at the Maggi Catena factory in Italy.

Click HERE to view a sample test certificate

There is one main calibration for 8mm chain - DIN766.
It is very important to check the size and calibration of your gypsy/chain before you order.
If you are unsure we can help you to decide - we will take all reasonable steps to ensure you get the correct chain.
Click HERE for Calibrated Anchor Chain - General Information


 

 

Do you need assistance? Then contact us...

If you have any questions or need help with your purchase, please call us on:

01297 20744 or email sales@jimmygreen.co.uk

sagepayBuy from us with confidence, with...

All payments are taken securely with SagePay.

cardsWe accept the following credit cards: